sorry gmail sends my replay to xiangfu@ only, forward to list now. ----------
Hi, > you have '--disable-firmware' in your configure. that mean there is no > nanonote firmware build > in your system. xburst-tools needs those firmware to boot nanonote from USB. > > for build those firmware you needs mipsel cross toolchain. or you can > download a deb file. > extract them from deb package. > http://projects.qi-hardware.com/index.php/p/xburst-tools/downloads/ yes, --disable-firmware is used. but I installed xburst_stage{1,2}.bin from xburst-tools_0.0+201002-1_i386.bin.tar.bz2 that was confirmed by "equery files". $ equery files dev-embedded/xburst-tools * Searching for xburst-tools in dev-embedded ... * Contents of dev-embedded/xburst-tools-9999: /etc /etc/xburst-tools /etc/xburst-tools/usbboot.cfg /usr /usr/bin /usr/bin/jzboot /usr/bin/usbboot /usr/bin/xbboot /usr/share /usr/share/xburst-tools /usr/share/xburst-tools/xburst_stage1.bin /usr/share/xburst-tools/xburst_stage2.bin or, should I use xburst_stage{1,2}.bin from deb file you mentioned? or, should I build mipsel-openwrt-linux-gcc for my gentoo/~ppc? >> working dir:/root/.qi/nanonote/ben/latest > > there should be a log file under '/root/.qi/nanonote/ben/latest' > will give us more info. digged log.txt is attached. sorry for jap timestamp is. :p Peace, _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
