Hi Uli Raich I guess this Ronzi A3 is base on LEPUS, so you can take a look at those pdf:
ftp://ftp.ingenic.cn/2soc/4760/RD4760_LEPUS/RD4760_LEPUS-HW%201.3_EN.pdf ftp://ftp.ingenic.cn/2soc/4760/RD4760_LEPUS/hw/1.3/RD4760_LEPUS_V1.3.1.pdf (more info: http://www.ingenic.cn/product.aspx?ID=58) On 08/16/2011 02:24 PM, Uli Raich wrote:
Hi, I am trying to adapt the Linux version of usbboot top the Ronzi A3. While most of the features now work, I still have problems to access the nand flash. I finally disassembled the device and had a look at the signals on the flash chip. I found that none of the interface signals arrive there. When I try direct GPIO, programming certain lines as output and looking at the signals on the flash chip, I have the same problem. Does anybody know, how the nand flash is connected to the jz4760 CPU? It looks like I have to enable something (a mux?) to get my signals through to the flash. Any help would be largely appreciated. Thanks Uli _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
