-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 18-01-12 19:19, Bas Wijnen wrote: > There is also bad news, but I'm sure it can be fixed. I have a new > computer, with a new ssh key. I cannot push my changes into the > git repository on the projects server for some reason.
This has been fixed, thanks Wolfgang for the help. Now for those who want to try it out: - - First of all, don't expect too much. The impressive thing is that it runs, not that it is already useful. ;-) - - Install a mipsel-linux-gnu cross-compiler if you don't have one yet. The easiest way on Debian is by adding this line to /etc/apt/sources.list: deb http://www.emdebian.org/debian/ squeeze main and installing gcc-4.4-mipsel-linux-gnu with your favourite package manager. - - Check out the repository from git://projects.qi-hardware.com/iris.git - - Either be root while talking to the device, or allow mortals to access newly plugged in usb devices by telling udev (for example by installing attached rules file in /etc/udev/rules.d/, which only does this for the NanoNote boot mode and when running Iris) - - If you have the serial port connected, make sure SERIAL in Makefile is your port and run make debug to start monitoring it. If you get errors about my setserial hacking, comment those lines out; I need them for my broken usb serial port. - - configure the server: cd mips/nanonote/server; autoreconf -fis; ./configure; cd ../../.. (You only need to do this once; building happens automatically) - - Make sure the Ben is powered on with usb boot. It should work by pressing u during the boot, but if it doesn't, let me know and use the hardware method. - - Build Iris and start it make What you should see: - - The server sends stage 1, then Iris, then it boots and connects to the booted system. The booted system uses a very inefficient protocol to retrieve files from the host. The server provides access to everything in fs/ with this method. - - It loads same executables and data (as defined in fs/init.config). Then it starts a timer application, which really is serveral programs (keyboard driver, display driver, buzzer driver (that's not the sound card, as you can hear), gui manager, the program itself). If you don't get it to work, or if you do ;-), please let me know. Questions, comments and patches are obviously welcome. However, before writing patches you will want to tell me what you'll be doing; I'm making big changes myself as well (mostly to userspace). If anything goes wrong, the serial output is very useful. So if at all possible, please send a serial log with bug reports. Thanks, Bas -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iEYEARECAAYFAk8cVbcACgkQFShl+2J8z5UOpgCg8fPIK3qqtyUlwBrzNBJrgIDt zrsAoLpnuLWB2lm4PZ1u2o44uyb6KPVk =xPGb -----END PGP SIGNATURE-----
# nanonote.rules - udev rules for Ben Nanonote # Copyright (C) 2005-2012 Bas Wijnen <[email protected]> # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # Set the avaspec spectrometer to be readable and writable by all # If you need other settings, you probably want USER and GROUP. SUBSYSTEMS=="usb", ATTRS{idVendor}=="601a", ATTRS{idProduct}=="4740", MODE="0666" SUBSYSTEMS=="usb", ATTRS{idVendor}=="fffe", ATTRS{idProduct}=="0002", MODE="0666"
nanonote.rules.sig
Description: Binary data
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
