On 03/25/2012 08:33 AM, David Kuehling wrote:
BTW also just repaired plplot, to make Octave plotting work again.
Packages here:
http://downloads.qi-hardware.com/people/dvdkhlng/openwrt/
Hi David
Under buildhost the plplog give:
is this because the 'octave' not compiled?
~~~~
cp -fpR
/home/xiangfu/openwrt-xburst.minimal/build_dir/target-mipsel_uClibc-0.9.33/plplot-5.9.7/ipkg-install/usr/lib/octave
/home/xiangfu/openwrt-xburst.minimal/build_dir/target-mipsel_uClibc-0.9.33/plplot-5.9.7/ipkg-xburst/plplot-octave/usr/lib/
cp: cannot stat
`/home/xiangfu/openwrt-xburst.minimal/build_dir/target-mipsel_uClibc-0.9.33/plplot-5.9.7/ipkg-install/usr/lib/octave':
No such file or directory
make[3]: ***
[/home/xiangfu/openwrt-xburst.minimal/bin/xburst/packages/plplot-octave_5.9.7-4_xburst.ipk]
Error 1
make[3]: Leaving directory
`/home/xiangfu/openwrt-xburst.minimal/feeds/qipackages/plplot'
ERROR: package/feeds/qipackages/plplot failed to build.
~~~~
Plplot seems to have some problems with compiling plplot-qt. Maybe
plplot-qt has to be disabled in for the nightly image builds? If that
target fails, all plplot packages go missing (?).
Mirko have fix the qt stuff. so that package should be ok now.
_______________________________________________
Qi Hardware Discussion List
Mail to list (members only): [email protected]
Subscribe or Unsubscribe:
http://lists.en.qi-hardware.com/mailman/listinfo/discussion
