Xiangfu Liu wrote: > [ 116.130000] usb 1-1: atusb_timer > [ 116.200000] usb 1-1: atusb_timer > [ 116.220000] at86rf230_state unexpected state change: 255, asked for 4 > [ 116.230000] at86rf230_xmit error: -16 > [ 116.310000] usb 1-1: atusb_timer > [ 116.810000] usb 1-1: atusb_timer
This looks like a communication problem, probably between the two chips on the atusb. State change 255 means that the driver sent a command to read the state register from the transceiver and got the value 255 back. 255 is not a value this operation should ever return. So either the command wasn't received by the transceiver or the transceiver failed to respond for some other reason. Maybe check that there isn't any conductive contamination on your atusb. If you have more than one atusb, you could try another and see if the problems persist. - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
