Hi This build is for people who want try recently new features. there is a new feature that Milkymist One can connect to WiFi network by using a TP LINK WR703N router(with OpenWrt flashed). I will update wiki page later today about the technical detail about this 703n/OpenWrt, if you have a 703n already you can flash that by using this firmware: http://downloads.qi-hardware.com/software/images/Milkymist_One/wireless-gadget/ar71xx/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin
How to reflash 703n: http://wiki.openwrt.org/toh/tp-link/tl-wr703n#flashing For more detail about this image, please check out the change log: http://en.qi-hardware.com/wiki/Milkymist_One_Firmware#2012-07-09 Flash latest stable Qi build: wget https://raw.github.com/milkymist/scripts/master/scripts/reflash_m1.sh chmod +x reflash_m1.sh ./reflash_m1.sh --qi # this will reflash all partition except the 'data' partition ./reflash_m1.sh --qi --data make sure you *BACKUP FIRST*. this will *REFLASH DATA PARITION*. Setup MAC address(the last two bytes): ./reflash_m1.sh --bios-mac 00 23 Image files are here: http://downloads.qi-hardware.com/software/images/Milkymist_One/2012-07-09 About backup your config/patches: http://en.qi-hardware.com/wiki/Milkymist_One_Firmware#Backup Best Regards Xiangfu _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
