I wrote: > Just > > git clone [email protected]:kicad-libs.git > git clone [email protected]:ben-wpan.git
This is sufficient for schematics. You'll need KiCad and can then view/edit the schematics with cd anelok/hw/ make sch For the layout, you need a recent version of KiCad (that supports the new .kicad_pcb board format). You also have to make -C kicad-libs/components make -C kicad-libs/modules make -C ../../ben-wpan/modules This in turn requires fped. If you don't have that yet, git clone [email protected]:fped.git make -C fped install Fped also has a set of prerequisites (nothing overly fancy), which are listed in http://projects.qi-hardware.com/index.php/p/fped/source/tree/master/README Some distributions also have fped packaged, so you may be able to use that one. But better to use the latest version. To do: set up schematics history generation for anelok (so that one can simply get a PDF without having to set up the whole EDA environment), similar to what we have for other Qi-Hw projects. That will need a bit of work, though, since some items may have suffered bit rot and I'll need to make a parallel install with an older version of KiCad, since the "batch mode" these tools use has radically changed. - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
