Also the previous picture shows that part of the display (e.g., in the lower left corner) was quite blurry. It's actually better than one would think by looking at all the small flaws the raw piece, but that's still not good enough.
Here is is the case on printed text. The blurring is quite intense because of the larg distance between text and window: http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-top-diffuse.jpg Pretty much unreadable. I then did a bit of polishing. This is what it looks like afterwards: http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-top-polished.jpg After cleaning off most of the red polishing paste, this is a look at the window with increased contrast: http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-top-polished-outside.jpg I didn't quite reach all the corners, which is why some of the text was still blurry. On the lower right side, the plastic overheated while polishing, warping it also on the outside. I'll have to be more careful the next time. The rest of the imperfections are all but invisible to the naked eye. Next: the paint job. - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
