Felix wrote: > Wow, it looks great! It even looks better than a lot of kickstarter > "prototypes" ;)
Heh, thanks :) And that case isn't even "nice" yet. I.e., apart from a number of mechanical issues, it still lacks: - smoothing the sides, - painting the bottom part, - switching to a more efficient wall structure (from "B" to "C" of [1]) which will in turn bring the paint closer to the outside. [1] http://downloads.qi-hardware.com/people/werner/anelok/tmp/walls.pdf > You've more experience than me in this business, but I've in my "to test > list" the bq25504 Nice characteristics but rather expensive. I also don't like the regulator to be something that may need a substantial redesign if it has to be substituted. We already have a number of single-source and thus "risky" componentes. The fewer the better. For Anelok, I already have the TI TLV61220 as an almost-drop-in- replacement for the Skyworks AAT1217. The AAT1217's data sheet suggests it has a high idle current (I'd have to measure to be sure, though) but the TLV61220 should be fine, even if it isn't quite as good as the BQ25504. - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
