On Wed, Feb 12, 2014 at 07:37:54AM -0300, Werner Almesberger wrote: > ... and now for something completely different: I've partially > implemented the in-circuit debugging protocols for the Freescale > KL2x MCUs and the TI CC25xx RF SoCs. > > This allows me to check that the chips on the Y-Box prototype > are healthy and I can even access IOs. Here's a snapshot of the > LEDs blinking: > > http://downloads.qi-hardware.com/people/werner/anelok/tmp/ybox-blink.jpg > > Green is on the KL25/26, orange is on the CC2543. The Ben (with > UBB) acts as the brain for the whole operation. > > The code doesn't support programming the Flash memories yet. > That will be the next step.
Excellent!!! How cool you are man. Question from my absolutely ignorance : the code can be used with just GPIOs? I mean, for example, from UBB+nanonote you could directly to talk with the MCU? (I see the nanonote in your snapshot :) ). Or you need extra hardware for this? Great stuff Werner. Rafa _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
