The Y-Box is coming along slowly but steadily. Highlights since my last post:
- flashing of the KL26 works now (not perfectly, but good enough to be useful), - the crystal -> CC2543 -> KL26 -> PLL -> USB clock path, with the CC2543 controlled over its debug interface from the KL26 and dividing the 32 MHz crystal clock to 2 MHz using a timer, works. - the KL26 enumerates on USB. A lot more details can be found here: https://gitorious.org/anelok/ybox/source/hw/STATUS To do: - program CC2543 Flash from the outside - implement DFU on the KL26. For now, there should be two DFU targets: - KL26 Flash (minus the area occupyed by the DFU loader) - CC2543 Flash In the future, there may be more targets: - pairing key - certificates/keys for firmware upload verification - do something with the RF side of the CC2543. So far, all the functionality will also be used in Anelok. DFU may be an Y-Box-only thing (Anlok can use the memory card instead), though I may add it to Anelok at least for development, too. - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
