On 09/09/2014 12:53 AM, Apelete Seketeli wrote: [...]
Lars-Peter Clausen (12): ubi: Read only the vid header instead of the whole page NAND: Optimize NAND_ECC_HW_OOB_FIRST read NAND: Add support for subpage reads for NAND_ECC_HW_OOB_FIRST
The NAND stuff could be send upstream I guess.
Add ili8960 lcd driver
This driver is not very good. I'd rather see this cleaned up and reworked first.
qi_lb60: Don't use 3-wire spi mode for the display for now
Could be send upstream.
mmc: jz4740: Use clk_prepare_enable/clk_disable_unprepare
Should be squashed into the mmc clkfreq support commit.
drivers/rtc/rtc-jz4740.c: jz4740: Add device tree support ASoC: jz4740-codec: Add device tree support mmc: jz4740: Use a regulator for power control
Should be send upstream. But needs a better commit message first.
mmc: jz4740: Add devicetree support slcd: Use generic dmaengine interface
Should be squashed into the scld driver commit.
dma: jz4740: Dequeue descriptor from active list before completing it
Is upstream now. The devicetree patches could also be submitted, but need Documentation/ first. - Lars _______________________________________________ Qi Hardware Discussion List Mail to list (members only): discussion@lists.en.qi-hardware.com Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
