Sell me teo !! ;-) Nice looking case On Fri, Jan 30, 2015 at 04:47:52AM -0300, Werner Almesberger wrote: > Fresh from the workshop: Anelok in a painted case. With the LED off: > > http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-2015/case-2015-led-off.jpg > > and on: > > http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-2015/case-2015-led-on.jpg > > Note that the transparent border is quite wide on the long sides of > the case. This is because I tweaked this case for the 2014 PCB > layout. With a 2015 board, the border is 0.5 mm narrower on each > side. > > Since the LED currently just shines through a hole in the paint into > the bezel (which is fairly thick at that point), there is a massive > light leak on the side: > > http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-2015/case-2015-led-light-leak.jpg > > Let's market this as a security feature :) > > > Alas, it seems that the OLED didn't like all the abuse it had to > endure (this board was before in the very tight 2014 case, which > bent the FPC in very nasty ways) and developed a flaw: > > http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-2015/case-2015-row-error.jpg > > It seems that two rows in the middle of the OLED somehow get > averaged. The flaw maintains its position when scrolling, and also > appears with content that does not contain the cursor, so this looks > like a genuine hardware problem. > > - Werner > > _______________________________________________ > Qi Hardware Discussion List > Mail to list (members only): [email protected] > Subscribe or Unsubscribe: > http://lists.en.qi-hardware.com/mailman/listinfo/discussion
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
