Right now a minimum of 3 public ips will be required between the two boxes:
2 - Each machine will share one REAL ip 1 - Each machine will both share one virtual ip ------------------------------------------------------------------- 3 total needed Carpdev changes this to need 1 total for both hosts but this is not ready in FreeBSD just yet. Scott On 8/19/05, M. Kohn <[EMAIL PROTECTED]> wrote: > We have a dual WAN setup (WAN and OPT1). > Every WAN interface takes a /29 subnet. > We have also an additionaly /29 subnet, which > is routable (to the DMZ) for every WAN. > In addition to that we also have an private > class-C net for our DMZ. > > So I need to setup the DMZ with three different > subnets, one outgoing NAT and two routable. > > I setup DMZ interface with real IP and right > netmask, which works (extended NAT aktivated). > Than I tested adding a CARP virtual IP with /32, > or CARP virtual IP with /29 from the other subnet > but no success... > > The CARP (failover) status page shows no MASTER > and no carp interface for this. And an ifconfig > shows the carpX interface with no IP. > > I fear it is the same problem missing carpdev > patch from OpenBSD like Bill wrote yesterday, > is it? > > > Regards, > Michael > > >
