On 1/27/06, Adam Gibson <[EMAIL PROTECTED]> wrote: > Bill Marquette wrote: > > On 1/27/06, Adam Gibson <[EMAIL PROTECTED]> wrote: > >> Thanks for the direction. I found the static-port setting. Someone has > >> probably already noticed the bug but the NAT listing does not display > >> properly for the rule I just created(the fields are in the wrong spot in > >> the table but editing the rule looks like it is setup correctly). I > >> wont be able to test it until later tonight. This is the xml that was > >> generated. The UDP packets in question that originate from the OPT1 > >> network are src=192.168.1.140 srcport=28004 dst=192.246.40.28 > >> dstport=27650 . > > > > Odd, I fixed that display issue a while ago, it should be in the > > latest snapshot :-/ > > > > --Bill > > Below is a link that shows the problem in case you want to see it. The > previous email shows the real Outbound NAT settings for it. > > http://www.xstatica.com/pfsense-snapshot20060125-outbound-nat-table-problem.png
Bleh, ok, so I didn't fix this right. Thanks for reporting it. As you mention, it's just a display issue. --Bill
