No, you need to reflash the embedded imaeg.
On 1/30/06, Adam Gibson <[EMAIL PROTECTED]> wrote: > Scott Ullrich wrote: > > This was fixed right after b1. > > > > Upgrade to > > http://www.pfsense.com/~sullrich/1.0-BETA1-TESTING-SNAPSHOT-1-29-06/ > > Is it possible with the pre beta snapshots to upgrade the 19 meg > embedded image of 1-25-06 with the 19 meg embedded image of 1-29-06 > using the firmware page? About 7 megs gets transmitted and then I just > get a TCP reset(a log entry about var being filled up by lighttpd is > mentioned in the logs around the same time as the tcp reset). > > I realize this is pre beta code but was hoping to avoid pulling the > device apart again and going through the setup wizard to restore the > backup config. > > > > > On 1/29/06, Randy B <[EMAIL PROTECTED]> wrote: > >> If some of you will recall, quite some time ago I complained that I > >> found that CARP was being transmitted on my untrusted interfaces between > >> a couple of test boxes in a lab instead of on their synchronization > >> interface; something that the rest of the list seemed to think a > --cut-- >
