Hi list,
I'm trying to get pfsense running on HP DL140G2 but FreeBSD 6.x i386 doesn't
like its acpi. However, I got it running on amd64 with SMP instead.
Hence, is there a guide/documentation for building pfsense base system? Thanks.
dmegs output for the hardware :-
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #2: Tue Feb 14 11:27:32 MYT 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/TEST
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2822.51-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100800<SYSCALL,NX,LM>
Hyperthreading: 2 logical CPUs
real memory = 1073152000 (1023 MB)
avail memory = 1018826752 (971 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem
0xdd100000-0xdd10ffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:16:35:9f:da:fe
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem
0xdd200000-0xdd20ffff irq 16 at device 0.0 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:16:35:9f:da:ff
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pci4: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci4
pci6: <ACPI PCI bus> on pcib6
pci4: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 16 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 19 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdd001000-0xdd0013ff irq 23 at
device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1470-0x147f at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xdc000-0xdffff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <CD-224E/9.9A> at ata0-master PIO4
ad2: 76319MB <Maxtor 6L080M0 BACE1G10> at ata1-master SATA150
ad3: 76319MB <Maxtor 6L080M0 BACE1G10> at ata1-slave SATA150
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device gm0 created (id=1210161776).
GEOM_MIRROR: Device gm0: provider ad2 detected.
GEOM_MIRROR: Device gm0: provider ad3 detected.
GEOM_MIRROR: Device gm0: provider ad3 activated.
GEOM_MIRROR: Device gm0: provider ad2 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
bge0: link state changed to UP
--
Warm regards,
Kevin Foo
Key fingerprint : 4B23 FC1C E50B 9693 CCDD 2A7D A048 E909 8924 9BDD
Public key :
http://keyserver.linux.it/pks/lookup?op=get&search=0xA048E90989249BDD
*****************************Internet Email Confidentiality Footer
*****************************
Legal Privilege & Confidentiality
---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains privileged and/or confidential information. If you are not
the intended recipient (or responsible for delivery of the message to such
person) or if you have inadvertently received this email, you should destroy or
delete this message and notify the sender by reply email accordingly. If you or
your employer do not consent to using Internet email for messages of this kind
please advise immediately by sending an email to the sender of this message .
All opinions, conclusions and other information in this message that do not
relate to the official business of Zaid Ibrahim & Co shall be understood as
neither given nor endorsed by Zaid Ibrahim & Co. Our company accepts no
liability for the content of this email, or for the consequences of any actions
taken on the basis of the information provided, unless that information is
subsequently confirmed in writing.
Caveat
-------------------------------------------------------------------------------------------------------------------------------------------------------------WARNING:
Computer viruses can be transmitted via email, and you should check this email
and any attachments for the presence of viruses. Zaid Ibrahim & Co accepts no
liability for any damage caused by any virus transmitted by this email. Our
employees are expressly required not to make defamatory statements nor infringe
or authorise any infringement of copyright or any other legal right via any
communications. Any such communication is contrary to our company policy and
outside the scope of the employment of said individual. We will not be liable
for such communication.
