Hello, I have put pfSense images on CF for from the pc hardware with a CF-IDE adapter, our Hacom/Lex hardware or the USB flash drive, using grub as the boot loader.
These images in the past can be upgraded with the "emrbedded" updates. However, for Beta 3, there is no embedded update image for "embedded" platform, of which these hardware are pretend to be. 1. IBM PC-compatible hardware (CF-IDE primary master). They should be used if you put the compactflash on the CF-IDE adapter on the primary IDE master. I have just built but not tested these, since I don't have the hardware here. http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-128-ad0.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-256-ad0.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-512-ad0.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-1gb-ad0.img.gz 2. For Hacom/Lex hardware which boot the CF from the secondary master drive. http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-128-ad2.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-256-ad2.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-512-ad2.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-1gb-ad2.img.gz 3. For USB flash drive, http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-128-da0.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-256-da0.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-512-da0.img.gz http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-1gb-da0.img.gz To install them, just do zcat pfSense-1.0-BETA3-256-ad0.img.gz | dd of=/dev/da0 bs=16k Just let me know if there are problems. Thanks. Bao -- Best Regards. Bao C. Ha Hacom OpenBrick Distributor USA http://www.hacom.net voice: (714) 530-8817 fax: (714) 530-8818 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38
