A WRAP (266MHz Geode) is maxed out at 32 mbit/s (with optimum packetsize). However with enabled trafficshaper and lots of traffic (bittorrent for example) it's not able to keep up at my 16/1 mbit/s adsl2+ connection. Depending on your WAN speed or if you need LAN to OPT traffic these devices reach thier limits sooner or later.
Holger > -----Original Message----- > From: Donald Pulsipher [mailto:[EMAIL PROTECTED] > Sent: Wednesday, October 04, 2006 8:03 PM > To: [email protected] > Subject: Re: [pfSense-discussion] IDS yet? > > > > Its a 4801 with the fastest processor I could get (266). > We'll see what I can do with it, I don't plan on using a > default config with snort. I know I'm going to have to tweak > it. With the right setup, I believe running snort on the > embedded image _is_ fea > sable. If I do manage to pull it off, I'll share what I did. > > -Don > > On Wed, 4 Oct 2006 13:01:44 -0500, "Bill Marquette" > <[EMAIL PROTECTED]> wrote: > > On 10/4/06, Donald Pulsipher <[EMAIL PROTECTED]> wrote: > >> > >> According to my rough calculations, I can do maybe 40mbps > throughput > > before I peg the cpu. Or maybe I'm just dreaming, but I > plan on testing > > it. > > > > With a 4801 or wrap??? Try again :) We peg the CPU on those boards > > well before 40mbit...I think the last benchmark I saw was 30+mbit. > > > > --Bill > >
