I've been able to get the Cisco phone working behind the firewall now. I'm able to make and receive phone calls.
There is one item which isn't working. Our PBX is outside of the pfsense firewall. These Cisco phones use TFTP to pull the config files. For some reason, I can't get the phones to connect to our PBX via TFTP. They connect fine if I manually configure each phone one by one, but I would prefer to use TFTP to update the configs. I googled around and noticed that people were using siproxyd. Should I install that via pfSense? Or is there something else I can do that will allow tftp to work? Thanks again. Patrick On Wed, 2008-01-02 at 21:06 -0500, Scott Ullrich wrote: > On 1/2/08, patrickm <[EMAIL PROTECTED]> wrote: > > Hi all, > > > > I'm in charge of replacing our Cisco PIX firewall with one that will allow > > us to use VPN, and a bunch of my other sysadmin friends have suggested > > using pfsense. Everything was super easy to set up initially, and now I > > want to get our Cisco 7971 SIP VoIP phones working behind NAT. > > > > I was wondering if anyone had to do something similar, or if anyone has a > > link or links to some helpful resources that will push me in the right > > direction. > > > > Thanks in advance! > > Visit Firewall, Nat, Outbound. Enable Advanced outbound NAT. > > Edit auto-created LAN rule, check static-port. Save. > > It should work okay now. > > Scott
