If you GUI hangs as you described you can use the local console or if
SSH is enabled from System -> Advanced you can use the console menu to
restart the GUI. If you do this then you will not need to reboot the
firewall to recover the GUI.
Mark J Crane
Daniele Guazzoni wrote:
I just noticed that the whole GUI logging hangs.
The firewall still run fine and syslog messages are sent out normally,
only the GUI stopped.
I've got to reboot to get it working again...
regards
-------------------------------------------------------------
Daniele Guazzoni
Senior Network Engineer, CCNP, CCNA
Linux and AMD-x86_64 or do you still with Windows and Intel ?
