The install media is supposed to automount. Hmmm
It may not mount because filesystem not in a good state.
Do the following. It will show a list of drives one of them being the media
that should mount in /mnt
echo | format -e
You will see out of the format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <DEFAULT cyl 971 alt 2 hd 64 sec 32>
/p...@0,0/pci1028,1...@1d,7/stor...@8/d...@0,0
1. c2d0 <ST380013- 5MR089S-0001-74.50GB>
/p...@0,0/pci-...@1f,2/i...@0/c...@0,0
Specify disk (enter its number): Specify disk (enter its number):
based on your output do (note added s0)
fsck -m /dev/dsk/c0t0d0s0
eg output
** /dev/dsk/c0t0d0s0
ufs fsck: sanity check: /dev/dsk/c0t0d0s0 already mounted
repeat for all drives listed and post the output.
--
This message posted from opensolaris.org
_______________________________________________
distribution-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/distribution-discuss
