Hi,
I've managed to get EON installed to a USB flash drive on this motherboard and
it boots ok. The only issue I have is that the /mnt filesystem doesn't auto
mount. This may be down to some subtlety in the hardware as I had to deactivate
6 of the USB ports (it has 14) before it would boot.
Could someone point me at the mechanism used to mount the flash drive? I can
mount it manually and update the config etc. But it would be nice if it all
worked properly.
eon:3:~#format -e
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <DEFAULT cyl 999 alt 2 hd 128 sec 32>
/p...@0,0/pci8086,3...@1d,7/stor...@6/d...@0,0
1. c1d0 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci-...@1f,2/i...@0/c...@0,0
2. c1d1 <HITACHI-PBHDAPH-0001-931.51GB>
/p...@0,0/pci-...@1f,2/i...@0/c...@1,0
3. c2d0 <SEAGATE-9QJ2Q37-0001-931.51GB>
/p...@0,0/pci-...@1f,2/i...@1/c...@0,0
4. c2d1 <DEFAULT cyl 60797 alt 2 hd 255 sec 63>
/p...@0,0/pci-...@1f,2/i...@1/c...@1,0
5. c3d0 <HITACHI-PBHDNLM-0001-931.51GB>
/p...@0,0/pci-...@1f,5/i...@0/c...@0,0
6. c4d0 <DEFAULT cyl 60797 alt 2 hd 255 sec 63>
/p...@0,0/pci-...@1f,5/i...@1/c...@0,0
Specify disk (enter its number):
eon:1:~#fsck -m /dev/dsk/c0t0d0s0
** /dev/rdsk/c0t0d0s0
ufs fsck: sanity check: /dev/dsk/c0t0d0s0 okay
Thanks,
--Ian
--
This message posted from opensolaris.org
_______________________________________________
distribution-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/distribution-discuss
