(this first part is done on your existing *nix machine) download applicable dvd iso (e.g. snv-130) from www.sunfreepacks.com (you need a download manager e.g. down it all firefox addon) mount the iso into a folder copy the Package folder for your driver from ./mountedfolder/Solaris_11/Product/
unzip the none.7z archive by 7z e -o/tmp SUNWmptsas/archive/none.7z this generates a binary called none in the /tmp directory (the following assumes you've installed eon to usb flash, and booted your nas box from usb, since we would be updating the driver onto the usb that we booted from) copy the binary none to the eon(nas) box (using scp if your connected to the lan) also copy the SUNWmptsas folder to the eon(nas) box Run the following commands: cpio -idumBv < none (make a note of what files are added where) chmod ug+x SUNWmptsas ./SUNWmptsas/install/postinstall check to make sure the corresponding driver paths have been added to /mnt/eon0/.backup if not, add them manually corresponding to the output of the cpio command e.g. /etc/driver_aliases /kernel/drv/rge /kernel/drv/rge.conf /kernel/drv/amd64/rge Run the following to test that everything is okay add_drv -v mpt_sas if no errors, run the following to update the image on the flash drive, then reboot and you should see the drives attached to your lsi 9211-8i hba or hbas with the same chipset updimg.sh -- This message posted from opensolaris.org _______________________________________________ distribution-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/distribution-discuss
