@dre2kse even openindiana 148 and opensol 134 are unable to use the jmb363 in raid-class-mode. I nearly believe there is no jmb363-raid-driver for the non-MS-Windows-world. linux quirks the controller to sata-ahci1.0-class-mode and uses the ahci-driver.
on my workstation with a jmb363-chip onboard I believe the mainboard-BIOS does the same things like linux (read/write pci(e)-regs/config-block) depending an selection in the mainboard-BIOS-settings and the onboard 363 is working with the ahci driver from EON 130 and openindiana 148. solution for using the add-on card should be: a) a hacked BIOS for my fileserver-mainboard ? b) a quirks-kernel-module ? c) hack the jmb363-bios, so the jmb363-addon-card starts in ahci-mode per default ? b) would be the coolest and cleanest but I´m no kernel hacker. -- This message posted from opensolaris.org _______________________________________________ distribution-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/distribution-discuss
