I have a similar problem... I own 2 SB3s and an SB2. One of my SB3s is outputting about 20dB less on the right channel. I have substituted the other Squeezeboxes into the system to confirm the fault. The faulty squeezebox outputs fine via headphones. I run this system in my recording studio through a Focusrite Audio interface, using toslink and configuring MixController to use ADAT as an optical SPDIF, routing the output either to my Tannoy main monitors, or to an Adam 2.1 monitor/sub setup. The setup lets me mute individual output channels, where I noticed another odd thing... muting the right channel works fine, but muting the left channel only diminishes its output somewhat, so it can still be heard. Seems odd to me and may be part of the same problem? Any ideas? If there is a full schematic of the SB3 available, I'd like to check it out and show it to my resident electronics wizard as he will most likely be able to fix the problem.
Thanks! Jenna ------------------------------------------------------------------------ Appalachik's Profile: http://forums.slimdevices.com/member.php?userid=62482 View this thread: http://forums.slimdevices.com/showthread.php?t=71914 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
