edwin2006 wrote: > I did order the meanwell, not ok?
I think you're good. The Meanwell MPM-30-5ST has the right voltage and is well over the required amperage (the original has 5V / 2.3A, the meanwell delivers 5V / 6A). That's no problem at all, it might even last longer by being under-challenged. I strongly advise against using anything that is not capable of delivering at least 2.3A. Placing a wall-wart PSU capable of 1A only is a call for trouble. Do make sure though to connect the power supply, whatever it is, with the correct polarity. It *will* destroy the entire Transporter if reversed. So better check twice, don't hesitate to ask here if you are not sure what the polarity should be. Good luck! Regards, Joe PN me if your Boom / Classic / Transporter display has issues! LMS 7.9.0 on Windows Server 2012 1x Squezeebox Classic SB2 8x Squeezebox Classic SB3 (3 waiting for repair) 8x Squeezebox Boom (one dead, one waiting for repair) 1x Transporter 2x Controller (one waiting for repair) 3x Touch (1 dead, 1 waiting for repair) 2x Radio (1 dead) ------------------------------------------------------------------------ JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=100509 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
