Some -z output.  I've removed all the discovery.c outputs.  The four
button presses in the output below were 25, then 22, then 25, then 22.


Code:
--------------------
    Last login: Wed Aug 21 17:14:18 on ttys000
  (base) Chris-Hills-MacBook-6:~ iszch$ ssh [email protected]
  [email protected]'s password: 
  _ _____             ___  __
  ___  (_) ___/__  _______ / _ \/ /__ ___ _____ ____
  / _ \/ / /__/ _ \/ __/ -_) ___/ / _ `/ // / -_) __/
  / .__/_/\___/\___/_/  \__/_/  /_/\_,_/\_, /\__/_/
  /_/                                   /___/
  
  piCorePlayer = piCore + Squeezelite + Raspberry Pi
  
  The software is provided "as is" without warranty of any kind,
  either express or implied, including without limitation any implied
  warranties of condition, uninterrupted use, merchantability,
  fitness for a particular purpose, or non-infringement.
  tc@pCPLoungePi4:~$ ./sbpd-script.sh
  sudo /home/tc/sbpd-pigpio -z -M dc:a6:32:03:82:22 -f 
/home/tc/sbpd_commands.cfg b,22,MIX-,2,0,MUTE,500 b,25,MIX+,2,0,VMAX,500
  1566404967.8954 6 sbpd.c,289: Options parsing: Set debug mode
  1566404967.8955 6 sbpd.c,309: Options parsing: Manually set MAC: 
dc:a6:32:03:82:22
  1566404967.8955 6 sbpd.c,343: Options parsing: Setting command config file to 
/home/tc/sbpd_commands.cfg
  1566404967.8956 6 sbpd.c,505: name=MIX+, value=["mixer","volume","+5"]
  1566404967.8956 6 control.c,81: Adding Command MIX+: Fragment 
["mixer","volume","+5"]
  1566404967.8956 6 sbpd.c,505: name=MIX-, value=["mixer","volume","-5"]
  1566404967.8956 6 control.c,81: Adding Command MIX-: Fragment 
["mixer","volume","-5"]
  1566404967.8956 6 sbpd.c,505: name=VMAX, value=["mixer","volume","100"]
  1566404967.8957 6 control.c,81: Adding Command VMAX: Fragment 
["mixer","volume","100"]
  1566404967.8957 6 sbpd.c,505: name=MUTE, value=["mixer","volume","0"]
  1566404967.8957 6 control.c,81: Adding Command MUTE: Fragment 
["mixer","volume","0"]
  1566404967.8957 6 GPIO.c,261: Initializing GPIO
  1566404968.0564 6 control.c,204: Button defined: Pin 22, BCM Resistor: up, 
Short Type: LMS, Short Fragment: ["mixer","volume","-5"] , Long Type: LMS, Long 
Fragment: ["mixer","volume","0"], Long Press Time: 500
  1566404968.0565 6 control.c,204: Button defined: Pin 25, BCM Resistor: up, 
Short Type: LMS, Short Fragment: ["mixer","volume","+5"] , Long Type: LMS, Long 
Fragment: ["mixer","volume","100"], Long Press Time: 500
  1566404968.0566 6 servercomm.c,176: Initializing CURL
  1566404968.0660 6 sbpd.c,237: Starting main loop polling
  
  1566404971.6158 7 GPIO.c,91: 289443 - 0= 289443  Pin Value=0   Stored Value=0
  1566404971.7698 7 GPIO.c,91: 289598 - 289443= 155  Pin Value=1   Stored 
Value=0
  1566404971.7698 6 GPIO.c,107: Short PRESS: 155
  1566404971.7699 6 control.c,107: Button CB set for button #:0, gpio pin 22
  1566404971.7721 6 control.c,218: Button pressed: Pin: 22, Press Type:Short
  1566404971.7721 6 servercomm.c,74: Send Command:0, 
Fragment:["mixer","volume","-5"]
  1566404971.7721 7 servercomm.c,122: Server ::192.168.1.4:9000 command: 
{"id":1,"method":"slim.request","params":["dc:a6:32:03:82:22",["mixer","volume","-5"]]}
  
  1566404973.9662 7 GPIO.c,91: 291794 - 0= 291794  Pin Value=0   Stored Value=1
  1566404974.1390 7 GPIO.c,91: 291966 - 291794= 172  Pin Value=1   Stored 
Value=1
  1566404974.1391 6 GPIO.c,107: Short PRESS: 172
  1566404974.1392 6 control.c,107: Button CB set for button #:0, gpio pin 22
  1566404974.1785 6 control.c,218: Button pressed: Pin: 22, Press Type:Short
  1566404974.1785 6 servercomm.c,74: Send Command:0, 
Fragment:["mixer","volume","-5"]
  1566404974.1785 7 servercomm.c,122: Server ::192.168.1.4:9000 command: 
{"id":1,"method":"slim.request","params":["dc:a6:32:03:82:22",["mixer","volume","-5"]]}
  
  1566404975.2376 7 GPIO.c,91: 293065 - 0= 293065  Pin Value=0   Stored Value=1
  1566404975.3915 7 GPIO.c,91: 293219 - 293065= 154  Pin Value=1   Stored 
Value=1
  1566404975.3915 6 GPIO.c,107: Short PRESS: 154
  1566404975.3916 6 control.c,107: Button CB set for button #:0, gpio pin 22
  1566404975.4861 6 control.c,218: Button pressed: Pin: 22, Press Type:Short
  1566404975.4862 6 servercomm.c,74: Send Command:0, 
Fragment:["mixer","volume","-5"]
  1566404975.4862 7 servercomm.c,122: Server ::192.168.1.4:9000 command: 
{"id":1,"method":"slim.request","params":["dc:a6:32:03:82:22",["mixer","volume","-5"]]}
  
  1566404976.6980 7 GPIO.c,91: 294526 - 0= 294526  Pin Value=0   Stored Value=1
  1566404976.9135 7 GPIO.c,91: 294741 - 294526= 215  Pin Value=1   Stored 
Value=1
  1566404976.9136 6 GPIO.c,107: Short PRESS: 215
  1566404976.9136 6 control.c,107: Button CB set for button #:0, gpio pin 22
  1566404976.9912 6 control.c,218: Button pressed: Pin: 22, Press Type:Short
  1566404976.9912 6 servercomm.c,74: Send Command:0, 
Fragment:["mixer","volume","-5"]
  1566404976.9913 7 servercomm.c,122: Server ::192.168.1.4:9000 command: 
{"id":1,"method":"slim.request","params":["dc:a6:32:03:82:22",["mixer","volume","-5"]]}
  
--------------------


------------------------------------------------------------------------
chill's Profile: http://forums.slimdevices.com/member.php?userid=10839
View this thread: http://forums.slimdevices.com/showthread.php?t=107001

_______________________________________________
diy mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/diy

Reply via email to