chill wrote: > I don't think this is going to be possible via LMS. It is possible to > get one or more players in LMS to play an external source, maybe with > some additional hardware (e.g. a USB ADC), but there will always be a > significant delay, so that the TV picture and the sound will always be > out of sync. I suspect you will need some sort of external amp that can > be switched between the Raspberry Pi and the TV as sources. And that > would probably mean that the HiFi Berry amp would be redundant - > depending on the external amp's inputs you could use the USB output from > the RPi or replace the HiFi Berry amp with either a DAC that could feed > analogue outputs to the external amp, or with a digi board that could > feed a digital toslink or coax signal to the amp.
Thank you Chill and Philippe for your responses. I'm not really sure if this is going to help but my source inputs (e.g. Amazon Firestick, set top box) are plugged into a 4 x 4 HDMI matrix which also has a separate coax and separate toslink?? (i think it is) for each output, so can something be done with this digital toslink from the HDMI matrix to the Pi Amp and/or TV that will be in 4 of the output rooms? ------------------------------------------------------------------------ tannaroo's Profile: http://forums.slimdevices.com/member.php?userid=69547 View this thread: http://forums.slimdevices.com/showthread.php?t=109926 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
