Hi, im use raspberry zero+pcm5102+picoplayer v6.0. added ir receiver, install jivelite,kernel keytables for ir. With command "ir-keytable -t" read remote code, make table and upload in jivelite ir tools. ------ table: samsung, type: nec 0x70714 KEY_MINUS 0x7076c KEY_EQUAL ------- i see keytable is loaded and recognized: ------- 497.490136: lirc protocol(necx): scancode = 0x70714 497.490203: event type EV_MSC(0x04): scancode = 0x70714 497.490203: event type EV_KEY(0x01) key_down: KEY_MINUS(0x000c) 497.490203: event type EV_SYN(0x00). 495.010092: lirc protocol(necx): scancode = 0x7076c 495.010171: event type EV_MSC(0x04): scancode = 0x7076c 495.010171: event type EV_KEY(0x01) key_down: KEY_EQUAL(0x000d) 495.250138: event type EV_SYN(0x00) -------- just nothing heapen.... i trying another keys - the same. trought ssh i see keyatable is loaded, protocol is "nec" all keypresses showing KEY_EQUAL(0x000d),KEY_MINUS(0x000c) etc. just not reaction from picoreplayer. where can be problem?
------------------------------------------------------------------------ martc's Profile: http://forums.slimdevices.com/member.php?userid=70165 View this thread: http://forums.slimdevices.com/showthread.php?t=112137 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
