bpa wrote: > Most of the SB Classic / SB3 is software controlled so a software issues > is most likely cause. Try doing a xilinx reset.
I take it a "xilinx reset" is what the manual terms a "factory reset". I had done that, or at least done as much of it as I could, already. It made no difference. I've just done it again (and again, it didn't work quite the way the instructions said it should*), and it's again made no difference. *The manual states, "How do I reset Squeezebox to factory default settings? Plug the power connector into Squeezebox while holding down the ADD button on the remote until you see the Set Up Networking prompt." Which I've done, but the Set Up Networking prompt never appears while I'm holding down the ADD button on the remote. Instead, the display flashes "factory reset", then some portion of the left hand side of the Logitech logo and name, over and over. When I let go the ADD button, then I do see the prompt for Set Up Networking. Misbehaviour on the part of the Squeezebox or just poor editing of the manual? (I agree, it looks like a software or configuration error, not a hardware fault, but how can I make progress?) ------------------------------------------------------------------------ kiwigander's Profile: http://forums.slimdevices.com/member.php?userid=70288 View this thread: http://forums.slimdevices.com/showthread.php?t=31187 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
