paul- wrote: > pigpiod requires an clock signal from the rpi. Reference the -t option > here: http://abyz.me.uk/rpi/pigpio/pigpiod.html > > If you are using the onboard rpi audio, that uses clock 0, so you need > to tell pigpiod to use clock 1. > If you are using an i2s DAC Hat, then that uses clock 1, so you need to > tell pigpiod to use clock 0. > If you are using USB audio, then it does not matter. > > To launch your script at boot, put it in the user commands on the bottom > of the tweaks page.
Hello paul and thank you for another time for trying to help me i have all ready put the commands in the tweaks page this way and they work but the system freezes if i go to main page and click the reboot button , this does not happend if i remove the command from the tweaks also everything is good if o open the ssh and manualy write my commands i have read in the topic about the clock -t so i try with 0 and 1 with the same results , i try putting some of the commands in the tweaks (to find the problematic) and maybe the pigpiod is this one the piCore runs on a raspberry pi 4 2gb with 64gb sd card and ethernet cable 32617 +-------------------------------------------------------------------+ |Filename: sbpd.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=32617| +-------------------------------------------------------------------+ ------------------------------------------------------------------------ billtsig's Profile: http://forums.slimdevices.com/member.php?userid=71096 View this thread: http://forums.slimdevices.com/showthread.php?t=107001 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
