skywalker wrote: > Hi, > > i have this rotary encoder AZDelivery > KY-040(https://www.amazon.de/gp/product/B079H3C98M/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) > and i conneted > GND to PIN 25 > + to PIN 1 > SW to PIN 29 (GPIO 5) > DT to PIN 37 (GPIO 26) > >
I have the same encoder. It works properly for volume control, and I have the central push button configured for play/pause. I have it connected as follows: GND to pin 6 (GND, so your pin 25 should also be fine) + to pin 1 (3V3) SW to pin 37 (GPIO26: SW is the pin for the central push button) DT to pin 38 (GPIO20: DT is for one direction of the rotary encoder) CLK to pin 40 (GPIO21: CLK is for the other direction of the rotary encoder) With these connections I use the following sbpd commands: e,21,20,VOLU,2 b,26,PAUS,2,0,STOP,500 I use pigpiod -t 0 -f -l -s 10 ------------------------------------------------------------------------ chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=107001 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
