My build used a bunch of Amazon, Ebay, and Aliexpress parts and designs.
I use this 6-channel select for my inputs: https://www.amazon.com/gp/product/B0154O4FDO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Output from the selector goes to the tone control: https://www.amazon.com/gp/product/B07DMV983D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 >From the tone/preamp stage, it feeds into a set of LM3886 boards (3 chips per channel) for my power amp stage. I do have a RIAA Preamp for the Turn Table input. It's simply between the RCA connection and the selector board as input 1. The tone control board could probably run passive and work just fine. I should try it to see. Depending on your plans for power, LM1875, LM3886, TDA7293, or TDA7294 chipamp kits would work too if you didn't want to go Class D. And after writing all that, I see you want a "Tape Out" type function. That's something this doesn't have....but maybe it'll help anyway. ------------------------------------------------------------------------ ShaneC80's Profile: http://forums.slimdevices.com/member.php?userid=71859 View this thread: http://forums.slimdevices.com/showthread.php?t=114680 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
