Paul Webster wrote: > See the example in the thread that I linked to. > > Did you reboot with the USB part already attached? > > Your should not need lirc for this because your remote almost certainly > emulates a keyboard.
Can it be useful: Hoping this can be useful: [ 8589.862823] usb 1-1.3: USB disconnect, device number 4 [ 9119.901503] usb 1-1.3: new full-speed USB device number 6 using xhci_hcd [ 9120.036939] usb 1-1.3: New USB device found, idVendor=1915, idProduct=1047, bcdDevice= 1.78 [ 9120.036958] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9120.036975] usb 1-1.3: Product: ZY Control [ 9120.036990] usb 1-1.3: Manufacturer: ZY.Ltd [ 9120.047610] input: ZY.Ltd ZY Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1915:1047.0005/input/input7 [ 9120.112297] hid-generic 0003:1915:1047.0005: input,hidraw1: USB HID v1.01 Keyboard [ZY.Ltd ZY Control] on usb-0000:01:00.0-1.3/input0 [ 9120.121133] input: ZY.Ltd ZY Control Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1915:1047.0006/input/input8 [ 9120.121734] input: ZY.Ltd ZY Control Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1915:1047.0006/input/input9 [ 9120.191920] input: ZY.Ltd ZY Control System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1915:1047.0006/input/input10 [ 9120.192506] hid-generic 0003:1915:1047.0006: input,hiddev96,hidraw2: USB HID v1.01 Mouse [ZY.Ltd ZY Control] on usb-0000:01:00.0-1.3/input1 ------------------------------------------------------------------------ Frapicore's Profile: http://forums.slimdevices.com/member.php?userid=71225 View this thread: http://forums.slimdevices.com/showthread.php?t=116121 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
