Paul Webster wrote: > I still see it at the end of the file (although it might be Tapatalk > caching the old one)
I have edited: gpu_mem=16 dtparam=audio=on dtoverlay=vc4-kms-v3d as for below #---pCP---------------------------------------------- # pCP does not use graphics chip by default, free up most memory #gpu_mem=16 initial_turbo=60 # onboard audio overlay #dtparam=audio=on audio_pwm_mode=2 # For Jivelite use with HDMI screens # Comment out the lines above # gpu_mem=xx # dtparam=audio=on # Then uncomment the following line. dtoverlay=vc4-kms-v3d Before the screen was black now there is no signal after the boot (I can see just the rpi boot and after no signal). I have edited the config.txt file with TextEdit via Mac. The rpi is connected to the monitor via hdmi. Can someone see something wrong? Thanks!! +-------------------------------------------------------------------+ |Filename: config 2.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=37514| +-------------------------------------------------------------------+ ------------------------------------------------------------------------ Frapicore's Profile: http://forums.slimdevices.com/member.php?userid=71225 View this thread: http://forums.slimdevices.com/showthread.php?t=116121 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
