On Thu, Apr 04, 2024 at 07:38:07PM +0200, Martin Wilck wrote:
> With the late patches for 10-dm.rules, DM_UDEV_DISABLE_OTHER_RULES_FLAG isn't
> restored from the udev database any more, so we don't need to restore
> the flag to its original state before it is saved to the db.
>
> Signed-off-by: Martin Wilck <[email protected]>
Reviewed-by: Benjamin Marzinski <[email protected]>
> ---
> multipath/11-dm-mpath.rules.in | 22 ++++++++++++----------
> 1 file changed, 12 insertions(+), 10 deletions(-)
>
> diff --git a/multipath/11-dm-mpath.rules.in b/multipath/11-dm-mpath.rules.in
> index 4386b6c..2f909c3 100644
> --- a/multipath/11-dm-mpath.rules.in
> +++ b/multipath/11-dm-mpath.rules.in
> @@ -19,7 +19,7 @@ ACTION=="add", ENV{DM_ACTIVATION}=="1",
> ENV{DM_SUSPENDED}!="1", ENV{DISK_RO}!="1
> # If this uevent didn't come from dm, don't try to update the
> # device state
> # Note that .MPATH_DEVICE_READY_OLD=="" here. Thus we won't activate the
> -# device below at force_activation, which is correct.
> +# device below at mpath_is_ready, which is correct.
> ENV{DM_COOKIE}!="?*", ENV{DM_ACTION}!="PATH_*", \
> IMPORT{db}="DM_COLDPLUG_SUSPENDED", \
> GOTO="force_activation"
> @@ -84,25 +84,27 @@ ENV{DM_ACTION}=="PATH_FAILED|PATH_REINSTATED", \
>
> LABEL="force_activation"
>
> +ENV{MPATH_DEVICE_READY}!="0", GOTO="mpath_is_ready"
> # Do not initiate scanning if no path is available,
> # otherwise there would be a hang or IO error on access.
> # We'd like to avoid this, especially within udev processing.
> -ENV{MPATH_DEVICE_READY}=="0", ENV{DM_NOSCAN}="1"
> -
> -# Skip all foreign rules if no path is available.
> +# This is communicated to later rules in DM_NOSCAN.
> +# Likewise, skip all foreign rules if no path is available.
> # Use DM_UDEV_DISABLE_OTHER_RULES_FLAG to communicate this
> -# to upper layers. The original value will be restored in a late
> -# udev rule.
> -ENV{MPATH_DEVICE_READY}=="0", \
> -
> ENV{.MPATH_SAVE_DISABLE_OTHER_RULES_FLAG}="$env{DM_UDEV_DISABLE_OTHER_RULES_FLAG}",
> \
> - ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1"
> +# to upper layers. With dm rules < v3, save the original value here;
> +# it will be restored in a late udev rule.
> +ENV{DM_UDEV_RULES_VSN}=="1|2", \
> +
> ENV{.MPATH_SAVE_DISABLE_OTHER_RULES_FLAG}="$env{DM_UDEV_DISABLE_OTHER_RULES_FLAG}"
> +ENV{DM_NOSCAN}="1", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1"
> +GOTO="dont_activate"
> +
> +LABEL="mpath_is_ready"
>
> # If the device comes back online, set DM_ACTIVATION so that
> # upper layers do a rescan. If the device is currently suspended,
> # we have to postpone the activation until the next event.
> # In this case, we have to set MPATH_DEVICE_READY=0; otherwise, the
> # MPATH_UNCHANGED logic will cause later rules to skipped in the next event.
> -ENV{MPATH_DEVICE_READY}=="0", GOTO="dont_activate"
> ENV{.MPATH_DEVICE_READY_OLD}!="0", GOTO="dont_activate"
> ENV{DM_SUSPENDED}=="1", ENV{MPATH_DEVICE_READY}="0", GOTO="dont_activate"
>
> --
> 2.44.0
