On 2024/05/20 12:20, Nitesh Shetty wrote:
> Add device limits as sysfs entries,
> - copy_max_bytes (RW)
> - copy_max_hw_bytes (RO)
>
> Above limits help to split the copy payload in block layer.
> copy_max_bytes: maximum total length of copy in single payload.
> copy_max_hw_bytes: Reflects the device supported maximum limit.
>
> Signed-off-by: Nitesh Shetty <nj.she...@samsung.com>
> Signed-off-by: Kanchan Joshi <josh...@samsung.com>
> Signed-off-by: Anuj Gupta <anuj2...@samsung.com>
> ---
> Documentation/ABI/stable/sysfs-block | 23 +++++++++++++++
> block/blk-settings.c | 34 ++++++++++++++++++++--
> block/blk-sysfs.c | 43 ++++++++++++++++++++++++++++
> include/linux/blkdev.h | 14 +++++++++
> 4 files changed, 112 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/ABI/stable/sysfs-block
> b/Documentation/ABI/stable/sysfs-block
> index 831f19a32e08..52d8a253bf8e 100644
> --- a/Documentation/ABI/stable/sysfs-block
> +++ b/Documentation/ABI/stable/sysfs-block
> @@ -165,6 +165,29 @@ Description:
> last zone of the device which may be smaller.
>
>
> +What: /sys/block/<disk>/queue/copy_max_bytes
> +Date: May 2024
> +Contact: linux-bl...@vger.kernel.org
> +Description:
> + [RW] This is the maximum number of bytes that the block layer
> + will allow for a copy request. This is always smaller or
> + equal to the maximum size allowed by the hardware, indicated by
> + 'copy_max_hw_bytes'. An attempt to set a value higher than
> + 'copy_max_hw_bytes' will truncate this to 'copy_max_hw_bytes'.
> + Writing '0' to this file will disable offloading copies for this
> + device, instead copy is done via emulation.
> +
> +
> +What: /sys/block/<disk>/queue/copy_max_hw_bytes
> +Date: May 2024
> +Contact: linux-bl...@vger.kernel.org
> +Description:
> + [RO] This is the maximum number of bytes that the hardware
> + will allow for single data copy request.
> + A value of 0 means that the device does not support
> + copy offload.
> +
> +
> What: /sys/block/<disk>/queue/crypto/
> Date: February 2022
> Contact: linux-bl...@vger.kernel.org
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index a7fe8e90240a..67010ed82422 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -52,6 +52,9 @@ void blk_set_stacking_limits(struct queue_limits *lim)
> lim->max_write_zeroes_sectors = UINT_MAX;
> lim->max_zone_append_sectors = UINT_MAX;
> lim->max_user_discard_sectors = UINT_MAX;
> + lim->max_copy_hw_sectors = UINT_MAX;
> + lim->max_copy_sectors = UINT_MAX;
> + lim->max_user_copy_sectors = UINT_MAX;
> }
> EXPORT_SYMBOL(blk_set_stacking_limits);
>
> @@ -219,6 +222,9 @@ static int blk_validate_limits(struct queue_limits *lim)
> lim->misaligned = 0;
> }
>
> + lim->max_copy_sectors =
> + min(lim->max_copy_hw_sectors, lim->max_user_copy_sectors);
> +
> return blk_validate_zoned_limits(lim);
> }
>
> @@ -231,10 +237,11 @@ int blk_set_default_limits(struct queue_limits *lim)
> {
> /*
> * Most defaults are set by capping the bounds in blk_validate_limits,
> - * but max_user_discard_sectors is special and needs an explicit
> - * initialization to the max value here.
> + * but max_user_discard_sectors and max_user_copy_sectors are special
> + * and needs an explicit initialization to the max value here.
s/needs/need
> */
> lim->max_user_discard_sectors = UINT_MAX;
> + lim->max_user_copy_sectors = UINT_MAX;
> return blk_validate_limits(lim);
> }
>
> @@ -316,6 +323,25 @@ void blk_queue_max_discard_sectors(struct request_queue
> *q,
> }
> EXPORT_SYMBOL(blk_queue_max_discard_sectors);
>
> +/*
> + * blk_queue_max_copy_hw_sectors - set max sectors for a single copy payload
> + * @q: the request queue for the device
> + * @max_copy_sectors: maximum number of sectors to copy
> + */
> +void blk_queue_max_copy_hw_sectors(struct request_queue *q,
> + unsigned int max_copy_sectors)
> +{
> + struct queue_limits *lim = &q->limits;
> +
> + if (max_copy_sectors > (BLK_COPY_MAX_BYTES >> SECTOR_SHIFT))
> + max_copy_sectors = BLK_COPY_MAX_BYTES >> SECTOR_SHIFT;
> +
> + lim->max_copy_hw_sectors = max_copy_sectors;
> + lim->max_copy_sectors =
> + min(max_copy_sectors, lim->max_user_copy_sectors);
> +}
> +EXPORT_SYMBOL_GPL(blk_queue_max_copy_hw_sectors);
Hmm... Such helper seems to not fit with Christoph's changes of the limits
initialization as that is not necessarily done using &q->limits but depending on
the driver, a different limit structure. So shouldn't this function be passed a
queue_limits struct pointer instead of the request queue pointer ?
> +
> /**
> * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase
> * @q: the request queue for the device
> @@ -633,6 +659,10 @@ int blk_stack_limits(struct queue_limits *t, struct
> queue_limits *b,
> t->max_segment_size = min_not_zero(t->max_segment_size,
> b->max_segment_size);
>
> + t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors);
> + t->max_copy_hw_sectors = min(t->max_copy_hw_sectors,
> + b->max_copy_hw_sectors);
> +
> t->misaligned |= b->misaligned;
>
> alignment = queue_limit_alignment_offset(b, start);
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index f0f9314ab65c..805c2b6b0393 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -205,6 +205,44 @@ static ssize_t queue_discard_zeroes_data_show(struct
> request_queue *q, char *pag
> return queue_var_show(0, page);
> }
>
> +static ssize_t queue_copy_hw_max_show(struct request_queue *q, char *page)
> +{
> + return sprintf(page, "%llu\n", (unsigned long long)
> + q->limits.max_copy_hw_sectors << SECTOR_SHIFT);
> +}
> +
> +static ssize_t queue_copy_max_show(struct request_queue *q, char *page)
> +{
> + return sprintf(page, "%llu\n", (unsigned long long)
> + q->limits.max_copy_sectors << SECTOR_SHIFT);
> +}
Given that you repeat the same pattern twice, may be add a queue_var64_show()
helper ? (naming can be changed).
> +
> +static ssize_t queue_copy_max_store(struct request_queue *q, const char
> *page,
> + size_t count)
> +{
> + unsigned long max_copy_bytes;
> + struct queue_limits lim;
> + ssize_t ret;
> + int err;
> +
> + ret = queue_var_store(&max_copy_bytes, page, count);
> + if (ret < 0)
> + return ret;
> +
> + if (max_copy_bytes & (queue_logical_block_size(q) - 1))
> + return -EINVAL;
> +
> + blk_mq_freeze_queue(q);
> + lim = queue_limits_start_update(q);
> + lim.max_user_copy_sectors = max_copy_bytes >> SECTOR_SHIFT;
max_copy_bytes is an unsigned long, so 64 bits on 64-bit arch and
max_user_copy_sectors is an unsigned int, so 32-bits. There are thus no
guarantees that this will not overflow. A check is needed.
> + err = queue_limits_commit_update(q, &lim);
> + blk_mq_unfreeze_queue(q);
> +
> + if (err)
You can reuse ret here. No need for adding the err variable.
> + return err;
> + return count;
> +}
> +
> static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
> {
> return queue_var_show(0, page);
> @@ -505,6 +543,9 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
> QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
> QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
>
> +QUEUE_RO_ENTRY(queue_copy_hw_max, "copy_max_hw_bytes");
> +QUEUE_RW_ENTRY(queue_copy_max, "copy_max_bytes");
> +
> QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
> QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
> QUEUE_RW_ENTRY(queue_poll, "io_poll");
> @@ -618,6 +659,8 @@ static struct attribute *queue_attrs[] = {
> &queue_discard_max_entry.attr,
> &queue_discard_max_hw_entry.attr,
> &queue_discard_zeroes_data_entry.attr,
> + &queue_copy_hw_max_entry.attr,
> + &queue_copy_max_entry.attr,
> &queue_write_same_max_entry.attr,
> &queue_write_zeroes_max_entry.attr,
> &queue_zone_append_max_entry.attr,
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index aefdda9f4ec7..109d9f905c3c 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -309,6 +309,10 @@ struct queue_limits {
> unsigned int discard_alignment;
> unsigned int zone_write_granularity;
>
> + unsigned int max_copy_hw_sectors;
> + unsigned int max_copy_sectors;
> + unsigned int max_user_copy_sectors;
> +
> unsigned short max_segments;
> unsigned short max_integrity_segments;
> unsigned short max_discard_segments;
> @@ -933,6 +937,8 @@ void blk_queue_max_secure_erase_sectors(struct
> request_queue *q,
> unsigned int max_sectors);
> extern void blk_queue_max_discard_sectors(struct request_queue *q,
> unsigned int max_discard_sectors);
> +extern void blk_queue_max_copy_hw_sectors(struct request_queue *q,
> + unsigned int max_copy_sectors);
> extern void blk_queue_max_write_zeroes_sectors(struct request_queue *q,
> unsigned int max_write_same_sectors);
> extern void blk_queue_logical_block_size(struct request_queue *, unsigned
> int);
> @@ -1271,6 +1277,14 @@ static inline unsigned int
> bdev_discard_granularity(struct block_device *bdev)
> return bdev_get_queue(bdev)->limits.discard_granularity;
> }
>
> +/* maximum copy offload length, this is set to 128MB based on current
> testing */
Current testing will not be current in a while... So may be simply say
"arbitrary" or something. Also please capitalize the first letter of the
comment. So something like:
/* Arbitrary absolute limit of 128 MB for copy offload. */
> +#define BLK_COPY_MAX_BYTES (1 << 27)
Also, it is not clear from the name if this is a soft limit or a cap on the
hardware limit... So at least please adjust the comment to say which one it is.
> +
> +static inline unsigned int bdev_max_copy_sectors(struct block_device *bdev)
> +{
> + return bdev_get_queue(bdev)->limits.max_copy_sectors;
> +}
> +
> static inline unsigned int
> bdev_max_secure_erase_sectors(struct block_device *bdev)
> {
--
Damien Le Moal
Western Digital Research
