Options only valid for HSG80 and MSA/HSV 1x0 arrays with Active/Standby mode exclusively, their firmware can not be upgraded to support ALUA.
Cc: Christophe Varoqui <[email protected]> Cc: device-mapper development <[email protected]> Signed-off-by: Xose Vazquez Perez <[email protected]> --- multipath/multipath.conf.5 | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5 index a59e7a1..e7df08c 100644 --- a/multipath/multipath.conf.5 +++ b/multipath/multipath.conf.5 @@ -228,8 +228,8 @@ Generate the path priority for LSI/Engenio/NetApp RDAC class as NetApp E/EF Series, and OEM arrays from IBM DELL SGI STK and SUN. .TP .I hp_sw -Generate the path priority for Compaq/HP controller in -active/standby mode. +Generate the path priority for HP/COMPAQ/DEC HSG80 and MSA/HSV arrays with +Active/Standby mode exclusively. .TP .I hds Generate the path priority for Hitachi HDS Modular storage arrays. @@ -311,7 +311,8 @@ Query the DGC/EMC specific EVPD page 0xC0 to determine the path state for CLARiiON CX/AX and EMC VNX arrays families. .TP .I hp_sw -Check the path state for HP storage arrays with Active/Standby firmware. +Check the path state for HP/COMPAQ/DEC HSG80 and MSA/HSV arrays with +Active/Standby mode exclusively. .TP .I rdac Check the path state for LSI/Engenio/NetApp RDAC class as NetApp E/EF @@ -818,8 +819,8 @@ Hardware handler for LSI/Engenio/NetApp RDAC class as NetApp E/EF Series, and OEM arrays from IBM DELL SGI STK and SUN. .TP .I 1 hp_sw -Hardware handler for Compaq/HP storage arrays in active/standby -mode. +Hardware handler for HP/COMPAQ/DEC HSG80 and MSA/HSV arrays with +Active/Standby mode exclusively. .TP .I 1 alua Hardware handler for SCSI-3 ALUA compatible arrays. -- 2.7.4 -- dm-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/dm-devel
