The udev property blacklisting is ignored on 'add' uevents
because uev_add_path() calls pathinfo() directly - but the
filter_property() check is only performed in path_discover().
So, move the call out from path_discover() into pathinfo().
Since path_discover() always calls pathinfo() to return,
either directly or via store_pathinfo(), the change is
equivalent for callers of path_discover(), which turns
out to be only path_discovery().
Interestingly, multipathd calls path_discovery() without
DI_BLACKLIST and then calls filter_path() to remove paths,
so make sure filter_path() also considers filter_property().
Test-case:
# cat /etc/multipath.conf
blacklist {
property "ID_SERIAL"
}
# udevadm info --query=property /dev/sdb | grep ID_SERIAL=
ID_SERIAL=0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1
# multipathd -d -s -v3 &
# echo add > /sys/block/sdb/uevent
Before:
uevent 'add' from '/devices/.../block/sdb'
Forwarding 1 uevents
sdb: add path (uevent)
...
0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1: load table [0 4194304 multipath 1
retain_attached_hw_handler 0 1 1 service-time 0 1 1 8:16 1]
...
sdb [8:16]: path added to devmap 0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1
After:
uevent 'add' from '/devices/.../block/sdb'
Forwarding 1 uevents
sdb: add path (uevent)
sdb: mask = 0x3f
sdb: udev property ID_SERIAL blacklisted
Signed-off-by: Mauricio Faria de Oliveira <mauri...@linux.vnet.ibm.com>
Reported-by: Benjamin Marzinski <bmarz...@redhat.com>
---
libmultipath/blacklist.c | 4 ++++
libmultipath/discovery.c | 7 ++++---
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/libmultipath/blacklist.c b/libmultipath/blacklist.c
index 676225f9c2e0..36af28213212 100644
--- a/libmultipath/blacklist.c
+++ b/libmultipath/blacklist.c
@@ -327,6 +327,10 @@ _filter_path (struct config * conf, struct path * pp)
{
int r;
+ r = filter_property(conf, pp->udev);
+ if (r > 0)
+ return r;
+
r = _filter_devnode(conf->blist_devnode, conf->elist_devnode,pp->dev);
if (r > 0)
return r;
diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c
index 3c5c808436b2..52abd4e75c89 100644
--- a/libmultipath/discovery.c
+++ b/libmultipath/discovery.c
@@ -117,9 +117,6 @@ path_discover (vector pathvec, struct config * conf,
if (!devname)
return PATHINFO_FAILED;
- if (filter_property(conf, udevice) > 0)
- return PATHINFO_SKIPPED;
-
if (filter_devnode(conf->blist_devnode, conf->elist_devnode,
(char *)devname) > 0)
return PATHINFO_SKIPPED;
@@ -1747,6 +1744,10 @@ int pathinfo(struct path *pp, struct config *conf, int
mask)
condlog(3, "%s: mask = 0x%x", pp->dev, mask);
+ if (mask & DI_BLACKLIST && pp->udev)
+ if (filter_property(conf, pp->udev) > 0)
+ return PATHINFO_SKIPPED;
+
/*
* Sanity check: we need the device number to
* avoid inconsistent information in
--
1.8.3.1
--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
