Xose,

I just saw this. Sorry for the late response.

I am not sure if the max_sectors_kb is a kernel or udev bug. What I would 
expect is for the block limits 
INQUIRY VPD  page, 0xB0, to be used to populate the /sys/block entries for 
max_sectors_kb. We have 
seen Linux distributions that don’t seem to do that but instead populate that 
entry with 32 MB even though 
we return 4 MB as our limit. We add the 4 MB limit in a udev rule that we have 
created and provide to our 
customers.  Adding it in multipath.conf will also get us 4 MB for the dm device 
and its slaves which is what we 
want. I don’t know if there is a preferred way but if we use multipath.conf 
then hopefully no users will ever 
have to deal with the higher value that will error out if a SCSI read or write 
is actually sent larger than 
the 4 MB maximum size.

Thanks,
Brian

Brian Bunker
SW Eng
br...@purestorage.com



> On Aug 7, 2019, at 9:05 AM, Xose Vazquez Perez <xose.vazq...@gmail.com> wrote:
> 
> On 6/26/19 7:37 PM, Brian Bunker wrote:
> 
>> It has been some time since we updated our PURE FlashArray configuration. The
>> Linux vendors that we had been seeing in the field were using very old 
>> versions
>> of multipath-tools, so we haven’t needed to change anything for some time. 
>> With
>> the release of RHEL8, some of our earlier values have been lost by upstream
>> changes. 
>> 
>> In addition we have our Active Cluster feature which leverages ALUA since our
>> last patch. The ALUA confguration will work for all FlashArrays with or 
>> without
>> Active Cluster.
>> 
>> We are changing 3 things.
>> 
>> 1. ALUA support
>> 
>> 2. Fast fail timeout from the default of 5 seconds to 10 seconds (We need 
>> this
>> for our FC NPIV port migration).
>> 
>> 3. Maximum sector size of 4MB. Some Linux vendors don’t honor the block 
>> limits
>> VPD page of INQUIRY).
> 
> 
> #3, kernel or udev bug?
> 
> 
>> diff --git a/libmultipath/hwtable.c b/libmultipath/hwtable.c
>> index 1d964333..37e97f60 100644
>> --- a/libmultipath/hwtable.c
>> +++ b/libmultipath/hwtable.c
>> @@ -1024,7 +1024,12 @@ static struct hwentry default_hw[] = {
>>                /* FlashArray */
>>                .vendor        = "PURE",
>>                .product       = "FlashArray",
>> -               .pgpolicy      = MULTIBUS,
>> +               .pgpolicy      = GROUP_BY_PRIO,
>> +               .pgfailback    = -FAILBACK_IMMEDIATE,
>> +               .hwhandler     = "1 alua",
>> +               .prio_name     = PRIO_ALUA,
>> +               .fast_io_fail  = 10,
>> +               .max_sectors_kb = 4096,


--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel

Reply via email to