On Tue, 2020-03-24 at 16:03 -0500, Benjamin Marzinski wrote: > If the partition information has changed on multipath devices (say, > because it was updated on another node that has access to the same > storage), users expect that running "multipathd reconfigure" will > update > that. However, if the checkers for the multipath device are pending > for > too long when the the device is reconfigured, multipathd will give up > waiting for them, and refuse to reload the device, since there are no > active paths. This means that no kpartx update will be triggered. > > Multipath is fully capable of reloading a multipath device that has > no > active paths. This has been possible for years. If multipath is > supposed > to reload the device, it should do so, even if there are no active > paths. > > Generally, when multipath is force reloaded, kpartx will be updated. > However when a device is reloaded with no paths, the udev rules won't > run kpartx. But they also weren't running kpartx when the first > valid > path appeared, even though the dm activation rules get run in this > case. > This changes 11-dm-mpath.rules to run kpartx when a device goes from > no > usable paths to having usable paths. > > Signed-off-by: Benjamin Marzinski <[email protected]> > --- > libmultipath/configure.c | 6 ------ > multipath/11-dm-mpath.rules | 2 +- > 2 files changed, 1 insertion(+), 7 deletions(-)
Reviewed-by: Martin Wilck <[email protected]> -- Dr. Martin Wilck <[email protected]>, Tel. +49 (0)911 74053 2107 SUSE Software Solutions Germany GmbH HRB 36809, AG Nürnberg GF: Felix Imendörffer -- dm-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/dm-devel
