On 8/14/20 1:51 AM, McIntyre, Vincent (CASS, Marsfield) wrote:
TL;DR I found a way forward, manually running multipath -a.
Details below, and a suggested tweak to the manpage.
I created a new LUN on the vtrak and mapped it to the test host.
The host sees it, but as expected there's no new multipath yet.
lsscsi does not show a new set of scsi devices either,
which is also expected.
qla2xxx [0000:04:00.0]-107ff:1: qla2x00_fcport_event_handler: schedule
qla2xxx [0000:04:00.0]-107ff:1: qla_scan_work_fn: schedule loop resync
qla2xxx [0000:04:00.0]-280e:1: HBA in F P2P topology.
qla2xxx [0000:04:00.0]-2814:1: Configure loop -- dpc flags = 0x60.
qla2xxx [0000:04:00.0]-107ff:1: qla2x00_fcport_event_handler: schedule
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250100015553ce36 pn
260700015553ce36 portid=1e0260.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250100015553ce36 pn
260600015553ce36 portid=1e0280.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250000015553ce36 pn
260200015553ce36 portid=1e02a0.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250000015553ce36 pn
260300015553ce36 portid=1e02c0.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250000015553ce36 pn
260100015553ce36 portid=1e0300.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250000015553ce36 pn
260000015553ce36 portid=1e0320.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250100015553ce36 pn
260500015553ce36 portid=1e0340.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250100015553ce36 pn
260400015553ce36 portid=1e0360.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 20000024ff002350 pn
21000024ff002350 portid=1e0500.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
203300a098b16b5f portid=1e08a0.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
203200a098b16b5f portid=1e08a1.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
206300a098b16b5f portid=1e08c0.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
204200a098b16b5f portid=1e08c1.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
204300a098b16b5f portid=1e0900.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
205200a098b16b5f portid=1e0920.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
205300a098b16b5f portid=1e0940.
qla2xxx [0000:04:00.0]-107ff:1: qla_scan_work_fn: schedule loop resync
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
206200a098b16b5f portid=1e0960.
qla2xxx [0000:04:00.0]-286a:1: qla2x00_configure_loop *** FAILED ***.
qla2xxx [0000:04:00.0]-280e:1: HBA in F P2P topology.
qla2xxx [0000:04:00.0]-2814:1: Configure loop -- dpc flags = 0x60.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250100015553ce36 pn
260700015553ce36 portid=1e0260.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250100015553ce36 pn
260600015553ce36 portid=1e0280.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250000015553ce36 pn
260200015553ce36 portid=1e02a0.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250000015553ce36 pn
260300015553ce36 portid=1e02c0.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250000015553ce36 pn
260100015553ce36 portid=1e0300.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250000015553ce36 pn
260000015553ce36 portid=1e0320.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250100015553ce36 pn
260500015553ce36 portid=1e0340.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 250100015553ce36 pn
260400015553ce36 portid=1e0360.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 20000024ff002350 pn
21000024ff002350 portid=1e0500.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
203300a098b16b5f portid=1e08a0.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
203200a098b16b5f portid=1e08a1.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
206300a098b16b5f portid=1e08c0.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
204200a098b16b5f portid=1e08c1.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
204300a098b16b5f portid=1e0900.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
205200a098b16b5f portid=1e0920.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
205300a098b16b5f portid=1e0940.
qla2xxx [0000:04:00.0]-2858:1: GID_PT entry - nn 200200a098b16b5f pn
206200a098b16b5f portid=1e0960.
qla2xxx [0000:04:00.0]-289f:1: Device wrap (1e0960).
qla2xxx [0000:04:00.0]-2869:1: LOOP READY.
qla2xxx [0000:04:00.0]-286b:1: qla2x00_configure_loop: exiting normally.
I emptied /etc/multipath.conf, ran update-initramfs -u and rebooted.
lsscsi shows multiple paths to the new LUN, but there's no new
multipath - all those shown below were already known to the system.
On earlier versions, the new multipath usually appeared automatically.
# multipath -ll
3600a098000b173f60000079e5da82d73 dm-12 DELL,MD38xxf
size=40T features='5 queue_if_no_path pg_init_retries 50 queue_mode mq'
hwhandler='1 rdac' wp=rw
|-+- policy='service-time 0' prio=14 status=active
| |- 1:0:10:0 sdaa 65:160 active ready running
| |- 1:0:12:0 sdac 65:192 active ready running
| |- 1:0:14:0 sdae 65:224 active ready running
| `- 1:0:8:0 sdy 65:128 active ready running
`-+- policy='service-time 0' prio=9 status=enabled
|- 1:0:11:0 sdab 65:176 active ready running
|- 1:0:13:0 sdad 65:208 active ready running
|- 1:0:7:0 sdx 65:112 active ready running
`- 1:0:9:0 sdz 65:144 active ready running
Aug 14 09:33:02 | sdd: alua not supported
Aug 14 09:33:02 | sdg: alua not supported
Aug 14 09:33:02 | sdag: alua not supported
Aug 14 09:33:02 | sdj: alua not supported
Aug 14 09:33:02 | sdm: alua not supported
Aug 14 09:33:02 | sdp: alua not supported
Aug 14 09:33:02 | sds: alua not supported
Aug 14 09:33:02 | sdv: alua not supported
222e300015555469c dm-10 Promise,VTrak E830f
size=20T features='3 queue_if_no_path queue_mode mq' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=-1 status=active
|- 1:0:0:20 sdd 8:48 active ready running
|- 1:0:1:20 sdg 8:96 active ready running
|- 1:0:15:20 sdag 66:0 active ready running
|- 1:0:2:20 sdj 8:144 active ready running
|- 1:0:3:20 sdm 8:192 active ready running
|- 1:0:4:20 sdp 8:240 active ready running
|- 1:0:5:20 sds 65:32 active ready running
`- 1:0:6:20 sdv 65:80 active ready running
Aug 14 09:33:02 | sdc: alua not supported
Aug 14 09:33:02 | sdf: alua not supported
Aug 14 09:33:02 | sdaf: alua not supported
Aug 14 09:33:02 | sdi: alua not supported
Aug 14 09:33:02 | sdl: alua not supported
Aug 14 09:33:02 | sdo: alua not supported
Aug 14 09:33:02 | sdr: alua not supported
Aug 14 09:33:02 | sdu: alua not supported
2221f000155c0792e dm-11 Promise,VTrak E830f
size=20T features='3 queue_if_no_path queue_mode mq' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=-1 status=active
|- 1:0:0:5 sdc 8:32 active ready running
|- 1:0:1:5 sdf 8:80 active ready running
|- 1:0:15:5 sdaf 65:240 active ready running
|- 1:0:2:5 sdi 8:128 active ready running
|- 1:0:3:5 sdl 8:176 active ready running
|- 1:0:4:5 sdo 8:224 active ready running
|- 1:0:5:5 sdr 65:16 active ready running
`- 1:0:6:5 sdu 65:64 active ready running
However I find that I can do this:
# multipath -v 3 -a 2228a0001558b1855
Aug 14 09:35:56 | set open fds limit to 1048576/1048576
Aug 14 09:35:56 | loading //lib/multipath/libchecktur.so checker
Aug 14 09:35:56 | checker tur: message table size = 3
Aug 14 09:35:56 | loading //lib/multipath/libprioconst.so prioritizer
Aug 14 09:35:56 | foreign library "nvme" loaded successfully
Aug 14 09:35:56 | libdevmapper version 1.02.155 (2018-12-18)
Aug 14 09:35:56 | DM multipath kernel driver v1.13.0
Aug 14 09:35:56 | No matching alias [2228a0001558b1855] in bindings file.
Aug 14 09:35:56 | wrote wwid 2228a0001558b1855 to wwids file
wwid '2228a0001558b1855' added
Aug 14 09:35:56 | unloading const prioritizer
Aug 14 09:35:56 | unloading tur checker
# multipath -v3 -r
Aug 14 09:36:24 | set open fds limit to 1048576/1048576
Aug 14 09:36:24 | loading //lib/multipath/libchecktur.so checker
Aug 14 09:36:24 | checker tur: message table size = 3
Aug 14 09:36:24 | loading //lib/multipath/libprioconst.so prioritizer
Aug 14 09:36:24 | foreign library "nvme" loaded successfully
Aug 14 09:36:24 | delegating command to multipathd
and now the multipath device for the new LUN appears.
# multipath -ll
3600a098000b173f60000079e5da82d73 dm-12 DELL,MD38xxf
size=40T features='5 queue_if_no_path pg_init_retries 50 queue_mode mq'
hwhandler='1 rdac' wp=rw
|-+- policy='service-time 0' prio=14 status=active
| |- 1:0:10:0 sdaa 65:160 active ready running
| |- 1:0:12:0 sdac 65:192 active ready running
| |- 1:0:14:0 sdae 65:224 active ready running
| `- 1:0:8:0 sdy 65:128 active ready running
`-+- policy='service-time 0' prio=9 status=enabled
|- 1:0:11:0 sdab 65:176 active ready running
|- 1:0:13:0 sdad 65:208 active ready running
|- 1:0:7:0 sdx 65:112 active ready running
`- 1:0:9:0 sdz 65:144 active ready running
Aug 14 09:36:35 | sdd: alua not supported
Aug 14 09:36:35 | sdg: alua not supported
Aug 14 09:36:35 | sdag: alua not supported
Aug 14 09:36:35 | sdj: alua not supported
Aug 14 09:36:35 | sdm: alua not supported
Aug 14 09:36:35 | sdp: alua not supported
Aug 14 09:36:35 | sds: alua not supported
Aug 14 09:36:35 | sdv: alua not supported
222e300015555469c dm-10 Promise,VTrak E830f
size=20T features='3 queue_if_no_path queue_mode mq' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=-1 status=active
|- 1:0:0:20 sdd 8:48 active ready running
|- 1:0:1:20 sdg 8:96 active ready running
|- 1:0:15:20 sdag 66:0 active ready running
|- 1:0:2:20 sdj 8:144 active ready running
|- 1:0:3:20 sdm 8:192 active ready running
|- 1:0:4:20 sdp 8:240 active ready running
|- 1:0:5:20 sds 65:32 active ready running
`- 1:0:6:20 sdv 65:80 active ready running
Aug 14 09:36:35 | sde: alua not supported
Aug 14 09:36:35 | sdh: alua not supported
Aug 14 09:36:35 | sdah: alua not supported
Aug 14 09:36:35 | sdk: alua not supported
Aug 14 09:36:35 | sdn: alua not supported
Aug 14 09:36:35 | sdq: alua not supported
Aug 14 09:36:35 | sdt: alua not supported
Aug 14 09:36:35 | sdw: alua not supported
2228a0001558b1855 dm-14 Promise,VTrak E830f
size=20T features='3 queue_if_no_path queue_mode mq' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=-1 status=active
|- 1:0:0:21 sde 8:64 active ready running
|- 1:0:1:21 sdh 8:112 active ready running
|- 1:0:15:21 sdah 66:16 active ready running
|- 1:0:2:21 sdk 8:160 active ready running
|- 1:0:3:21 sdn 8:208 active ready running
|- 1:0:4:21 sdq 65:0 active ready running
|- 1:0:5:21 sdt 65:48 active ready running
`- 1:0:6:21 sdw 65:96 active ready running
Aug 14 09:36:35 | sdc: alua not supported
Aug 14 09:36:35 | sdf: alua not supported
Aug 14 09:36:35 | sdaf: alua not supported
Aug 14 09:36:35 | sdi: alua not supported
Aug 14 09:36:35 | sdl: alua not supported
Aug 14 09:36:35 | sdo: alua not supported
Aug 14 09:36:35 | sdr: alua not supported
Aug 14 09:36:35 | sdu: alua not supported
2221f000155c0792e dm-11 Promise,VTrak E830f
size=20T features='3 queue_if_no_path queue_mode mq' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=-1 status=active
|- 1:0:0:5 sdc 8:32 active ready running
|- 1:0:1:5 sdf 8:80 active ready running
|- 1:0:15:5 sdaf 65:240 active ready running
|- 1:0:2:5 sdi 8:128 active ready running
|- 1:0:3:5 sdl 8:176 active ready running
|- 1:0:4:5 sdo 8:224 active ready running
|- 1:0:5:5 sdr 65:16 active ready running
`- 1:0:6:5 sdu 65:64 active ready running
So it seems that multipath can be made to work, but perhaps
the manual page could be enhanced a little to cover this case.
diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
index 05a5e8ff..718dd16a 100644
--- a/multipath/multipath.conf.5
+++ b/multipath/multipath.conf.5
@@ -1516,6 +1516,9 @@ handler to known devices (which includes all devices
supporting SCSI-3 ALUA)
and disallow changing the handler
afterwards. Setting \fBhardware_handler\fR for such devices on these kernels
has no effect.
+.PP
+If your device has been configured to disable ALUA support,
+\fBhardware_handler\fR will be set to \fI0\fR.
.RE
.
.
If E830f is an Active-Active array without ALUA support,
add to /etc/multipath.conf:
devices {
device {
vendor "Promise"
product "VTrak"
product_blacklist "VTrak V-LUN"
path_grouping_policy "multibus"
detect_prio "no"
hardware_handler ""
prio "const"
failback "manual"
no_path_retry 30
}
}
run update-initramfs, and reboot.
--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
