On Mon, 19 Oct 2015 10:47:22 -0400 Hendrik Boom <[email protected]> wrote:
> On Mon, Oct 19, 2015 at 09:38:20AM -0500, Thaddeus Nielsen wrote: > > On Mon, 19 Oct 2015 16:05:37 +0200 > > Didier Kryn <[email protected]> wrote: > > > > > Le 19/10/2015 15:24, Hendrik Boom a écrit : > > > > On Mon, Oct 05, 2015 at 05:13:40PM -0400, Hendrik Boom wrote: > > > >> On Mon, Oct 05, 2015 at 09:47:02PM +0200, Riccardo Boninsegna wrote: > > > >>> On Mon, Oct 5, 2015 at 9:12 PM, Hendrik Boom <[email protected]> > > > >>> wrote: > > > >>>> I installed lpr, and it did take a lot of cups off. Do I really > > > >>>> need cups? > > > >>> Nope, especially with a Brother that's very LPR-friendly! > > > >>> As you found out, cups-bsd is just a port of LPR programs to CUPS. > > > >>> > > > >>>> But I still don't know how to specify my network printer. > > > >>> I'm not familiar at all with LPR, but I know a printcap entry for the > > > >>> printer is created (if it's currently connected via USB) by the > > > >>> driver's postinst somewhere under /opt/Brother; according to the > > > >>> printcap manpage, you'd have to edit the "lp" option -- the > > > >>> description says "local printer device, or port@host for remote"! > > > >> Presumeably that would be port 515 at whatever the IP number for the > > > >> printer is. Will try that wen I'm home near the priniter again. > > > >> > > > >> And what's there in the way of termcap is a shell script > > > >> /opt/brother/Printers/hl3170cdw/inf/setupPrintcapij that creates a > > > >> termcap. I hope it will get executed at the right time. At bootup, > > > >> perhaps? > > > >> > > > >> I'll see when I'm home again. > > > > Hand-edited /etc/termcap: > > > > root@notlookedfor:/home/hendrik# cat /etc/printcap > > > > HL3170CDW:\ > > > > :mx=0:\ > > > > :sd=/var/spool/lpd/hl3170cdw:\ > > > > :sh:\ > > > > :[email protected]:\ > > > > :if=/opt/brother/Printers/hl3170cdw/lpd/filterhl3170cdw: > > > > root@notlookedfor:/home/hendrik# > > > > > > > > Now I get > > > > > > > > hendrik@notlookedfor:~$ lpr -h -PHL3170CDW > > > > Documents/math/Librationism=1407.3877v3.ps > > > > lpr: cannot open /var/spool/lpd/hl3170cdw/.seq: Permission denied > > > > hendrik@notlookedfor:~$ > > > > > > > > This happens even if I run as root: > > > > > > > > root@notlookedfor:/home/hendrik# lpr -h -PHL3170CDW > > > > Documents/math/Librationism=1407.3877v3.ps > > > > lpr: cannot open /var/spool/lpd/hl3170cdw/.seq: Permission denied > > > > root@notlookedfor:/home/hendrik# > > > > > > > > That directory is owned by the lp daemon: > > > > > > > > oot@notlookedfor:/home/hendrik# ls -al /var/spool/lpd/hl3170cdwtotal 8 > > > > drwx------ 2 daemon lp 4096 Oct 5 14:40 . > > > > drwxr-xr-x 5 root root 4096 Oct 19 09:02 .. > > > > -rw------- 1 daemon lp 0 Oct 5 14:32 acct > > > > -rw------- 1 daemon lp 0 Oct 5 14:32 log > > > > -rw------- 1 daemon lp 0 Oct 5 14:32 status > > > > -rw------- 1 daemon lp 0 Oct 5 14:32 status.pr > > > > root@notlookedfor:/home/hendrik# > > > > > > > > and it contains no .seq file. Preumably that fle would be created as > > > > needed. > > > > And presumably the permissions are checked in some way that can exclude > > > > root. > > > > > > > > > > > > > > Hi Hendrik. > > > > > > I can see one reason for root to be unable to get the permission: > > > lpr being owned by another user than root and being suid; this is fine > > > at the condidiont that this owner is 'daemon', given the owner and > > > permissions of /var/spool/lpd. > > > > > > Didier > > > > > Another thing to examine: lp is the group on the directory but that > > directory had no write permission for the group, if I recall > > correctly. > > Correct: > root@notlookedfor:/home/hendrik# ls -ald /var/spool/lpd/hl3170cdw > drwx------ 2 daemon lp 4096 Oct 5 14:40 /var/spool/lpd/hl3170cdw > root@notlookedfor:/home/hendrik# > > But with lpr being suid root, should that matter? At least, I think > tht's what the s's mean: > > root@notlookedfor:/home/hendrik# which lpr > /usr/bin/lpr > root@notlookedfor:/home/hendrik# ls -l /usr/bin/lpr > -rwsr-sr-x 1 root lp 26536 Nov 20 2014 /usr/bin/lpr > root@notlookedfor:/home/hendrik# > > -- hendrik Sorry, I missed that; yes, I agree that the setuid should allow a user to print. Does lpr.log have any helpful message? RPTN _______________________________________________ Dng mailing list [email protected] https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
