Hi! On 2017-11-29 08:37, Dr. Nikolaus Klepp wrote: > Hi! > > Am Mittwoch, 29. November 2017 schrieb Didier Kryn: > > Le 29/11/2017 à 08:38, Dr. Nikolaus Klepp a écrit : > > > Hi! > > > > > > When bootin ascii and eth0 is present and configured as dhcp and eth0 is > > > not connected to a network, then the boot process is blocked at ~ 1 > > > minute at the stage where eth0 is configured. This is quite anoying and > > > did not happen on jessie. Is there an easy way to get the old behaviour > > > (i.e. background dhcp request) back on ascii? > > > > > > > Sorry to reply by this triviality: did you check > > /etc/network/interfaces ? > > > > If you have 'auto eth0' , then it might explain the wait. > > Normally, if the cable is meant to be unplugged/replugged, you > > should have > > 'allow-hotplug eth0' instead. > > > > Didier > > Well, this is exactly the problem: I have these lines in > /etc/network/interfaces: > > allow-hotplug eth0 > iface eth0 inet dhcp >
Maybe I did not make myself clear: No matter which line I put in /etc/network/interfaces, be it "allow-hotplug eth0" or "auto eth0", booting is delayed when no network is present and dhcp should be used. Could someboy else please check if this is behavior is reproducable? Nik _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng