Am Mittwoch, 12. Dezember 2018 schrieb Didier Kryn: > Le 12/12/2018 à 13:58, Dr. Nikolaus Klepp a écrit : > > Am Dienstag, 11. Dezember 2018 schrieb Gonzalo Pérez de Olaguer Córdoba: > >> Hi Michael K. > >> > >> El Fri, 7 Dec 2018 12:45:11 +0100 > >> "Michael K." <mich...@cacn.de> escribió: > >> > >>> After a Dev1 Setup on a Laptop (whit eth0), i have to wait a long time > >>> for the eth0 on "cold boot". > >>> > >>> I "cold boot" my Laptop > >>> I look to the "Boot Messages" > >>> I see the following Msg: > >>> > >>> Configuring Network Interfaces ifup: Waiting for Lock on > >>> /run/network/ifstat.eth0 > >>> > >>> After 2 or 3 minutes to wait, the Laptop boot up, > >> Just in case this could help, I've been having this same *symptom* > >> on KVM virtual machines running ascii. > >> > >> My situation was eth0 being configured through DHCP and using the > >> dhcp client from the isc-dhcp-client package, which sends (maybe buggy) > >> DHCPDECLINE packets. > >> > >> My workaround was to replace isc-dhcp-client with pump. > >> > >> If you want more details, tell me and I will continue writing. > >> > >> Bye, > >> Salo. > >> > > Now this is a neet tick! It also solves the issue that booting hangs on the > > said message when no network cable is attached to eth0. > > > > Nik > > > Is it as simple as apt-get remove isc-dhcp-client; apt-get install > pump ?
Yes, but I first installed pump and then purged isc-dhcp-client. -- Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ... _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng