On Thu, 11 Jun 2020 03:50:54 +0100 tux...@sapo.pt wrote: > > As I need to apply a power cycle I suppose it is not a software > > issue (is that right?). I'm just trying the Ascii image to see what > > will happen, but I'm not very hopefull. > > > > Has anyone seen such issues with these boards? > > problems with rtc clock are not uncommon, the need for a power > cycle, seems to be.. > > This discrepancies, in the date, .. how many days it takes to > happen, does you have any Idea? > does the Boards are properly powerup?I mean suficient levels of > Voltage/Current.. > > Try to update the date with something like 'ntpdate ntp_server_ip' > And see is that helps, if yes then you can run it via a cronjob, > from time to time..
No, even cronjobs do not work or give segmentation fault. It must be the hardware. There must be a batch with these issues, I'm not the only one BTW. I wonder if it has got something to do with the wifi chip. A crash occurs earlier if you load the kernel module. > For beowulf only orangepi_zero_plus2 image is available.. > > Try to install the Devuan ascii image: > https://mirror.leaseweb.com/devuan/devuan_ascii/embedded/README.txt The ASCII image is ok, but I updated this image to Beowulf and I used Armbian kernel with it. But I fear it will crash again. Anyway, I just got some Rasberry Pi Zero-W now and I think I will stay with these boards. Remember I have also Orange Pi PC, different CPU, suffering from the same issues. R. -- richard lucassen https://contact.xaq.nl/ _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng