On Wed, 4 Aug 2021 00:59:30 +0200 aitor <aitor_...@gnuinos.org> wrote:
> Hi, > > On 4/8/21 0:18, aitor wrote: > > > > Hi Arnt, > > > > On 3/8/21 22:31, Arnt Karlsen wrote: > >> ..is there one? 'fdisk -l ' or somesuch should work, even if > >> there are some new fancy /dev names missing symlinks to /dev/sdc, > >> e.g. killed by that mlterm crash. > > > > The command for the interactive shell of debian-installer is > > "list-devices". Examples: > > > > ~ # list-devices usb-partition > > /dev/sda1 > > /dev/sda2 > > > > ~# list-devices disk > > /dev/sda > > /dev/sdb > > > > HTH, > > > > Aitor. > > > Forget this, it was a cross-install... > > Aitor. Yes, it's a matter of ensuring that the device node /dev/sdc is installed in the "chroot" filesystem; basically doing # mknod $target/dev/sdc b 8 32 (see eg linux/Documentation/admin-guide/devices.txt) If installing on a loopback filesystem you'd need to use the major:minor of the loopback device while naming it /dev/sdc during this installation. .. and don't forget to remove that dev/sdc afterwards Ralph. _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng