Isn't that just the default health check for your defined pool servers?
BR Christof Chen
Djerk Geurts via dnsdist <dnsdist@mailman.powerdns.com> schrieb am Di., 12.
Sept. 2023, 16:44:
> Hi all,
>
> While doing a tcpdump of DNS traffic to determine if also-notify was
> working I noticed root queries being received by an internal authoritative
> server that I wasn’t expecting. And according to the DNSdist configuration
> I don’t think I should be seeing these either. So I think I need some help
> making sense of it all.
>
> I run FreeIPA as authoritative for zones of internal (sub.)domains. There
> are two PowerDNS recursors fronted by two DNSdist machines. The desired
> logic is as follows:
>
>
> - Both DNSdist servers forward all requests to the primary PowerDNS
> server. For now ignore I have two, they’re identical and uses are the
> primary and secondary DNS servers for everything that needs a dns server.
> - DNSdist servers have a mgmt IP and a service IP:
> - Service IP bound to DNSdist: 10.0.1.13
> - Mgmt. IP, not bound to DNSdist: 10.0.2.13
> - The second PowerDNS-recursor is backup
> - The IPA server(s) should only be used for updates (by IPA-clients)
>
>
> -- define downstream servers, aka backends
> newServer({address="10.0.1.11", name="rns00", useProxyProtocol=true})
> newServer({address="10.0.1.12", name="rns01", pool={"backup"},
> useProxyProtocol=true})
> newServer({address="10.0.0.10", name="ipa0", pool={"auth"}})
> newServer({address="10.0.0.11", name="ipa1", pool={"auth"}})
>
> -- Send queries to default pool when servers are available
> addAction(PoolAvailableRule(""), PoolAction(""))
> -- Send queries to fallback pool if not
> addAction(AllRule(), PoolAction("backup"))
> -- Send UPDATES to IPA
> addAction(AndRule({OpcodeRule(DNSOpcode.Update)}), PoolAction("auth"))
>
> -- Refuse incoming AXFR, IXFR, NOTIFY and UPDATE
> ----addAction(OrRule({OpcodeRule(DNSOpcode.Notify),
> OpcodeRule(DNSOpcode.Update), QTypeRule(DNSQType.AXFR),
> QTypeRule(DNSQType.IXFR)}), RCodeAction(DNSRCode.REFUSED))
> -- Refuse incoming AXFR, IXFR and NOTIFY
> addAction(OrRule({OpcodeRule(DNSOpcode.Notify), QTypeRule(DNSQType.AXFR),
> QTypeRule(DNSQType.IXFR)}), RCodeAction(DNSRCode.REFUSED))
>
> -- Drop incoming requests with X-Proxied-For fields
> addAction(RecordsTypeCountRule(DNSSection.Additional, 65280, 1, 65535),
> DropAction())
>
> The tcpdump shows repeated queries for a.root-servers.net:
>
> IP 10.0.2.13.42939 > 10.0.0.10.domain: 19831+ A? a.root-servers.net. (36)
> IP 10.0.0.10.domain > 10.0.2.13.42939: 19831 1/0/0 A 198.41.0.4 (52)
>
> This is a DNS query from the server running DNSdist, from an IP address
> that DNSdist doesn’t listen on. I assume DNSdist just uses whatever source
> address the OS deems suitable for egress traffic, which in my case would
> indeed be 10.0.2.13.
>
> So my questions are:
>
>
> - Why are A queries sent to the IPA server, when only UPDATE queries
> should be sent there?
> - Why the repeated queries? I see repeated A record lookups for
> a.root-servers.net from both DNSdist servers and both
> PowerDNS-recursors. I would expect at least the recursors to cache these
> requests.
> - How do I fix the DNSdist behaviour? Should I move the primary DNS
> server into a pool? None of the failover examples I’ve seen show the
> primary DNS servers in a named pool.
>
>
> —
> Thanks,
> *Djerk Geurts*
>
> _______________________________________________
> dnsdist mailing list
> dnsdist@mailman.powerdns.com
> https://mailman.powerdns.com/mailman/listinfo/dnsdist
>
_______________________________________________
dnsdist mailing list
dnsdist@mailman.powerdns.com
https://mailman.powerdns.com/mailman/listinfo/dnsdist
