Hello List,
I try without success to assign always the same IP (or range) per switch port (no matter the mac address, only matters the port at which the client is connected)
To do this I use switches with dhcp relay option 82 activated. So telling, any discover getting to dnsmasq includes circuit-id and remote-id
I dont understand the usage of dhcp-circuitid and dhcp-remoteid commands, may you please post me an example?
I tried the following at dnsmasq.conf:
dhcp-range=net:ignacio,192.168.7.1,192.168.7.4,255.255.255.0
dhcp-circuitid=ignacio,b9:06:00:00:01:01:01:05, dhcp-remoteid=ignacio,00:06:00:80:63:60:e1:64
Would this suffice? I suppose not as it does not work. (Hex values got from wireshark so they should be ok)
Any help is appreciatted!
Thanks
Ignacio
DISCLAIMER: Privileged and/or Confidential information may be contained in this message. If you are not the addressee of this message, you may not copy, use or deliver this message to anyone. In such event, you should destroy the message and kindly notify the sender by reply e-mail. It is understood that opinions or conclusions that do not relate to the official business of the company are neither given nor endorsed by the company. Thank You.
